Ultradent™ Porcelain Etch and Silane

Ultradent 90-second Porcelain Etch is used to etch porcelain veneers, crowns, bridges, inlays, onlays, and fractured dental porcelain. Ultradent 60-second Silane is used after hydrofluoric acid etching to prepare the surface for bonding resin.

Studies have demonstrated that Silane, when used with Porcelain Etch and a quality bonding resin, yields the highest bond strength to porcelain when compared with other porcelain bonding products.1 Both Porcelain Etch and Silane may be used intraorally or extraorally.

Porcelain Etch is a viscous, buffered 9% hydrofluoric acid
Etch is easy to control and place
Will not stain composite or resin cement
Silane is a single-component solution
Yields highest porcelain-to-resin bond strengths1
Porcelain Etch and Silane may also be used on lithium disilicate (IPS e.max®2 ) restorations
Certified gluten free

Technical Details

Viscous, Buffered 9% Hydrofluoric Acid

Porcelain Etch is a buffered, gelled hydrolic acid designed specifically to etch fractured dental porcelain and etching porcelain veneers, crowns, or inlays. It can also be used for etching porcelain crowns before bonding orthodontic brackets. It is buffered and gelled to minimize any irritation that could occur from the hydrofluoric acid vapor.

Etch is Easy to Control and Place

Porcelain Etch features a high visibility yellow hue so you can see exactly where it is placed. It is also viscous enough to stay where you place it.

Designed to Work Together

Porcelain Etch and Silane are designed to be used together when etching porcelain to provide high porcelain-to-resin bond strengths. When used with a high-quality bonding resin, Porcelain Etch and Silane can produce one of the highest porcelain-to-resin bond strengths compared to other porcelain bonding products.1

Clinicals

Porcelain Surface Before and After Porcelain Etch

Porcelain — Diamond-cut porcelain surface. (Photo courtesy of Dr. Cornelis Pameijer)

Same porcelain surface following a 90-second etch with Ultradent Porcelain Etch. (Photo courtesy of Dr. Cornelis Pameijer)

Procedures

Preparing the Porcelain

See Instructions for Use for complete instructions, warnings, and precautions.

Step 1

Etch clean bonding surface with Porcelain Etch for 90 seconds, rinse, and dry.

Step 2

CLINICAL TIP: Apply phosphoric acid (Ultra-Etch™ etchant) for five seconds to remove porcelain salts and debris formed by hydrofluoric acid etching. Rinse and air dry.

Step 3

Apply a puddle coat of Silane to inside surface for 60 seconds, dry, and set prosthesis aside. Do not rinse.

Frequently Asked Questions

When should I use Porcelain Etch and Silane?

Porcelain Etch and Silane can be used for etching porcelain, lithium disilicate, lithium silicate and other silica-based materials. It is not indicated for use with zirconia.

Will the Porcelain Etch stain composites or resin cements?

No, Porcelain Etch is a predictable, stain-free chemistry designed to give high visibility without discoloring materials.

Can Porcelain Etch be used intraorally?

Yes! Porcelain Etch is ideal for use with intraoral porcelain etching, but a rubber dam or EtchArrest must be used to protect nearby tissue and restorations.

Same porcelain surface following a 90-second etch with Ultradent Porcelain Etch. (Photo courtesy of Dr. Cornelis Pameijer)

Procedures

Preparing the Porcelain

See Instructions for Use for complete instructions, warnings, and precautions.

Step 1

Etch clean bonding surface with Porcelain Etch for 90 seconds, rinse, and dry.

Step 2

CLINICAL TIP: Apply phosphoric acid (Ultra-Etch™ etchant) for five seconds to remove porcelain salts and debris formed by hydrofluoric acid etching. Rinse and air dry.

Step 3

Apply a puddle coat of Silane to inside surface for 60 seconds, dry, and set prosthesis aside. Do not rinse.

Frequently Asked Questions

When should I use Porcelain Etch and Silane?

Porcelain Etch and Silane can be used for etching porcelain, lithium disilicate, lithium silicate and other silica-based materials. It is not indicated for use with zirconia.

Will the Porcelain Etch stain composites or resin cements?

No, Porcelain Etch is a predictable, stain-free chemistry designed to give high visibility without discoloring materials.

Can Porcelain Etch be used intraorally?

Yes! Porcelain Etch is ideal for use with intraoral porcelain etching, but a rubber dam or EtchArrest must be used to protect nearby tissue and restorations.

Choose Category

Bisco Porcelain Etch

Alternative Products

ULTRADENT PORCELAIN ETCH& SILANE MINI KIT