Toboom KIT OF PREPARATION TEETH FOR PORCELAIN / ALLOY INLAY

1) TR-22: ISO 806 314 197 524 016

Used for the preparation of cavity preventive expansion.

2) SF-D31: ISO 806 314 110 524 012

Used for the preparation of retention form and resistance form depth, more than  2mm.

3) TF-D15: ISO 806 314 170 524 020

Used for alloy inlay/onlay preparation of flat at the bottom of the cavity,  point, line, angle is clear

4) TF-D15F: ISO 806 314 170 514 020

Used for preparation of the slant cavity, make 45 degrees on the enamel cant of  the edge of the cavity, wideth about 1.5mm. Lateral wall: parallel or outreach  2-5 degrees, and in the same direction as path of insertion.

5) TR-D10: ISO 806 314 196 524 020

6) TR-09: ISO 806 314 196 524 025

Alloy inlay/onlay preparation of bottom axial surface, point, line, angle is  clear, round obtuse angle. Lateral wall: parallel or outreach 2-5 degrees, and  in the same direction as path of insertion

7) TR-17F: ISO 806 314 196 514 021

8) TR-D36F: ISO 806 314 198 514 024

Used for finishing and polishing the cavity, point line, angle is clear, round  obtuse angle.